How it works Close
Find a spot in GPS, read its measurement, and mark it on the canvas.
Mark a point
Find the spot. Paste coordinates in any common format (see Coordinate formats below) and tap Plot point, tap Use my location while you’re on the property, or tap the map.
Pick where to measure from. Canvas corner is the top-left corner of the front face. Origin is any landmark or saved point you choose; one close to the spot keeps measurements short.
Measure and place. Measure across first, then up or down, and center the sticker on that spot. The orange dashed line on the map shows the path.
Save it. Name the spot and tap Save point so it’s in your list for later.
Tape a trail
Export from onX. Save a track or line as GPX or KML.
Import it. Tap Import file, or drag the file onto this page.
Choose the bend detail. Fewest bends keeps the tape within about 20 ft of the trail; More detail follows it within about 5 ft.
Open the trail. Tap its name to see the bend list. The bend numbers also appear on the map.
Dot, cut and tape. Put a pencil dot at each bend, cut each piece to the length in the Tape to cut column, and run 1/8 in tape from dot to dot.
Adding many points at once
Paste a list into Add many points at once, or import a CSV or text file. Put one point per line: its name, then its coordinates, for example Ridge stand, 45.70412, -92.54011 . Commas, tabs or semicolons can separate the parts. For a spreadsheet, use columns named Name, Latitude and Longitude (or a single Coordinates column), then save it as CSV or copy the rows straight into the box. Download template gives you a ready-made file. Lines the page can’t read are skipped and counted. Waypoints in GPX or KML files from onX are added automatically.
The coordinate box, the point list and the calibration boxes all accept these. Latitude or longitude can come first, and a missing minus sign on the longitude is fine: the page picks the reading that lands near the property and shows the result so you can check it.
Format Examples
Decimal degrees 45.70412, -92.54011 45.70412 N, 92.54011 W
Degrees and decimal minutes (handheld GPS) N45 42.247 W92 32.407 45° 42.247′ N, 92° 32.407′ W
Degrees, minutes, seconds (Google Earth) 45°42'14.8"N 92°32'24.4"W 45 42 14.8 N, 92 32 24.4 W
UTM 15T 535800 5061277
MGRS (military grid) 15T WL 35800 61277
Plus code (Google Maps) PF35+JX 86Q9PF35+JX
Map link A Google Maps or Apple Maps link that includes the pin’s coordinates
The map
Tap to read a spot. Scroll, pinch or double-click to zoom; drag to move around; Reset to fit. The ring with a cross marks the origin.
Keeping your work
Everything saves to the map on its own, and anyone you’ve given access sees the same points and trails on any device after signing in. Deleted items can be brought back from Recently deleted. Download a backup file now and then for your own copy.
On a computer, hover over buttons and the small i icons for more detail.
Where to place the sticker
Measure from
Canvas corner Origin
Move origin to plotted spot
From the canvas corner
– right – down
Plot a point or tap the map.
Measure across first, then up or down, and center the sticker on that spot.
Trails and points
Add many points at once
Paste a list into the box, or import a CSV or text file. Put one point per line: its name, then its coordinates.
Ridge stand, 45.70412, -92.54011
Pond blind, 45°42'14.8"N 92°32'24.4"W
Creek crossing, N45 42.247 W92 32.407
Rows copied from Excel or Google Sheets also work, using Name, Latitude and Longitude columns. Any format the coordinate box accepts works here. See all formats
Add points
Import CSV or text file
Download template
Trails from onX
Export a track or line from onX as GPX or KML, then import it or drop the file anywhere on this page. Waypoints in the file are added as points. Tap a trail in the list below to open its bend list; open trails show their bend numbers on the map.
Import GPX or KML
Bend detail
Fewest bends Balanced More detail
Download points (CSV)
Download bend lists (CSV)
Print bend lists
Backup
Points and trails save to the map automatically, and everyone with access sees the same ones. Deleted items can be brought back from Recently deleted in the list above. A backup file is an extra copy you keep yourself.
Add them to the map No thanks
Download backup file
Restore from backup
Map settings
Map photo
The photo must show exactly the 32 × 48 in front face (a 2 × 3 shape), north up. It’s stored privately; only people on this map can see it.
Upload map photo
Calibration
The map needs at least two known points to turn GPS into inches. Drop a pin on each place below in onX or Google Earth and paste its coordinates. The road intersection and the two roofs are the most accurate because they look the same in every aerial photo; the property corners also work. Three or more lets the page catch typos.
Save calibration
Loading map photo…
1×
+
−
Reset
Current point
Saved points
Trails at true tape width
Front face 32 × 48 in. Tap to read a spot; scroll or pinch to zoom.